Device Provisioning - ClearlyIP - 14IP

Device Provisioning – ClearlyIP

Device Provisioning – Clearly IP Phones

Provisioning Instructions for Clearly IP Phones

cipPhone270

  1. Plug the Network/LAN/Ethernet cable into the Internet port on the back of the IP Phone and wait several moments for the device to acquire an IP Address.

  2. Press the Menu softkey on the phone to access the settings

    cipMenuButton

To get IP Address of phone

  1. Select "Status" and Press Enter

    img-20240719181626462

  2. Select "Information" and Press Enter

    img-20240719181640901

  3. This screen will display the IP Address of the phone

    img-20240719181652162

To Perform factory reset

  1. Enter IP Address in a browser from a computer on the same IP address range (Network). Ex: http://1.2.3.4

  2. The default administrator login
    login: admin
    password: admin

  3. Click "Management" tab from the top menu

  4. Click "Upgrade" tab from the left menu

  5. Click "Reset To Factory" button

To Configure for Auto Provisioning

  1. Follow steps 1 to 3 above to login in to the administration page on the device

  2. Click "Auto Provision" tab from the left menu

  3. Set the following fields

    1. "PnP Active" to "No"

    2. "Upgrade Mode" to "HTTPS"

    3. "Config Server Path" to "https://vernons.siptalk.com/cip/auto.cfg?mac="

    4. "To Override Server" to "No"

    5. Click "SaveSet" button to save settings

    6. Click "Autoprovision Now" button to begin auto provisioning. The device will request configuration from our provisioning server. You will notice the device power cycle a couple times when the configuration is loaded.