CP920, 960, 965

T43U

T19P

T46G, S, U

T22P

T48G, S, U

T23G

T53

T33G

T54

T40G

T58

T41S

W52/56

T42G, S, U

W60

ACD_INITIAL_STATE

1

It configures the initial agent state.

1-Available 2-Unavailable

AUTO_ANSWER_BINARY

0

It enables or disables auto answer a SIP call. Note: The phone cannot automatically answer the incoming call during a call or while dialing even if auto answer is enabled.

0-Disabled 1-Enabled, the phone can automatically answer an incoming call.

AUTO_LINEKEYS

1

It enables or disables to assign multiple line keys to associate with a specific account. Note: The number of the line keys is determined by "account.X.number_of_linekey". It is not applicable to T19(P) E2/CP920 phones.

0-Disabled 1-Enabled

AUTOPROVISION_MODE

1

0 Disabled (default), 1 Power on, 4 Repeatedly

BACKGROUND

Name of the background photo. Only supported on T46_ and T48_ Models

String

BACKLIGHT_LEVEL

8

It configures the intensity of the LCD screen when the phone is active.

Integer from 1 to 10

BACKLIGHT_TIMEOUT

0

It configures the delay time (in seconds) to change the intensity of the LCD screen when the phone is inactive.

0-Always On 1-Always Off (not applicable to T54W/T54S/T52S/T48S/T48G/T46S/T46G/T29G phones) 15-15s 30-30s 60-1min 120-2min 300-5min 600-10min 1800-30min

BACKUP_ENABLE

BLF-EXPANSION-PRIORITY

0

It configures the order of BLF list DSS keys assigned automatically. Note: It works only if "phone_setting.auto_blf_list_enable" is set to 1 (Enabled). It is only applicable to T54W/T54S/T53W/T53/T52S/T48S/T48G/T46S/T46G/T29G/T27G phones. To assign Ext Key, make sure the expansion module has been connected to the phone in advance.

0-linekey->exp1 key->expN key 1-exp1 key->expN key->linekey 2-linekey page1->page1 from exp1 key to expN key->page2 from exp1 key to expN key->…->linekey from page2 to page3 3-page1 from exp1 key to expN key->page2 from exp1 key to expN key->…->linekey. Note: N is the number of your connected expansion modules.

CALL_WAITING_BINARY

1

It enables or disables the call waiting feature.

0-Disabled, a new incoming call is automatically rejected by the phone with a busy message during a call. 1-Enabled, the phone screen will present a new incoming call during a call.

CANCEL_KEY_TYPE

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

CID_SOURCE

6

It configures the identity of the caller.

0-FROM 1-PAI 2-PAI-FROM 3-PRID-PAI-FROM 4-PAI-RPID-FROM 5-RPID-FROM 6-PREFERENCE, the phone uses the custom priority order for the sources of caller identity (configured by the parameter "sip.cid_source.preference").

CLID_PREFERENCE

P-Preferred-Identity, P-Asserted-Identity, Remote-Party-ID, From

It configures the priority order for the sources of caller identity information. Note: Yealink phones can derive caller identity from the following SIP headers: From, P-Asserted-Identity (PAI), P-Preferred-Identity and Remote-Party-ID (RPID). It works only if "account.X.cid_source" is set to 6 (PREFERENCE).

String

CONF_KEY_TYPE

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

COUNTRY

United States

It configures the country tone for the phones.

Custom, Australia, Austria, Brazil, Belgium, Chile, China, Czech, Czech ETSI, Denmark, Finland, France, Germany, Great Britain, Greece, Hungary, Lithuania, India, Italy, Japan, Mexico, New Zealand, Netherlands, Norway, Portugal, Spain, Switzerland, Sweden, Russia, United States

CUSTOM_RING

It configures the access URL of the custom ring tone file.

URL within 511 characters

CUSTOM_SOFTKEYS

It configures the access URL of the custom softkey layout file in the Talking state. Note: It works only if "phone_setting.custom_softkey_enable" is set to 1 (Enabled).

URL within 511 characters

DATE_FORMAT

4

It configures the date format.

0-WWW MMM DD 1-DD-MMM-YY 2-YYYY-MM-DD 3-DD/MM/YYYY 4-MM/DD/YY 5-DD MMM YYYY 6-WWW DD MMM. Use the following mapping: "WWW" represents the abbreviation of the week; "DD" represents a two-digit day; "MMM" represents the first three letters of the month; "YYYY" represents a four-digit year, and "YY" represents a two-digit year.

DEVICE_ACCESS_PWD

c2w*oDdg.KkDqBU!W7VM

DIALNOW_DELAY

1

It configures the delay time (in seconds) for the dial now rule. When entered numbers match the predefined dial now rule, the phone will automatically dial out the entered number after the designated delay time. If it is set to 0, the phone will automatically dial out the entered number immediately. Note: It works only if the values of the parameters "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0 (Disabled).

Integer from 0 to 14

DISPLAY_CONTACT_PHOTO

0

It configures whether to display contact avatar when it receives an incoming call, dials an outgoing call or engages in a call. Note: It is only applicable to T54W/T54S/T52S/T48S/T48G/T46S/T46G/T29G phones.

0-Never, do not display contact avatar no matter whether the contact avatar exists or not 1-Always, display the customized contact avatar if it exists; display the built-in avatar if the customized contact avatar does not exist 2-Adaptive, display the customized contact avatar if it exists; otherwise do not display

DISPLAY_RECENT_CALLS

ENABLED OR DISABLED THE PHONE DISPLAYING RECENT CALLS WHEN DIALING

0-Disabled 1-Enabled

DNS_SERVER_1

8.8.8.8

It configures the primary IPv4 DNS server. Note: It works only if "static.network.ip_address_mode" is set to 0 (IPv4) or 2 (IPv4 & IPv6). In DHCP environment, you also need to make sure "static.network.static_dns_enable" is set to 1 (On).

IPv4 Address

DNS_SERVER_2

4.2.2.2

It configures the secondary IPv4 DNS server. Note: It works only if "static.network.ip_address_mode" is set to 0 (IPv4) or 2 (IPv4 & IPv6). In DHCP environment, you also need to make sure "static.network.static_dns_enable" is set to 1 (On).

IPv4 Address

DOWN_KEY_TYPE

61

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

ENABLE_ACD

0

It enables or disables the ACD feature.

0-Disabled 1-Enabled

ENABLE_ACD

0

It enables or disables the phone to display the ACD softkeys such as Login or Logout on the idle screen. Note: It works only if "account.X.acd.enable" is set to 1 (Enabled).

0-Disabled 1-Enabled

ENABLE_DND

1

It triggers the DND feature to on or off. Note: It works only if "features.dnd.allow" is set to 1 (Enabled) and "features.dnd_mode" is set to 1 (Custom). It is not applicable to T19(P) E2/CP920 phones.

0-Off 1-On, the phone will reject incoming calls on account X.

ENABLE_DND

1

It enables or disables the DND feature.

0-Disabled, DND cannot be activated and users are not allowed to configure DND on the phone. 1-Enabled

ENABLE_FLEX_SEATING

0

It enables or disables the flexible seating feature. Note: For host, it works only if "account.X.hoteling.enable" and "account.X.acd.enable" are set to 0 (Disabled).

0-Disabled 1-Enabled

ENABLE_GUI

1

It enables or disables to access the web user interface of the phone over a non-secure tunnel (HTTP).

0-Disabled 1-Enabled

ENABLE_GUI

1

It enables or disables to access the web user interface of the phone over a secure tunnel (HTTPS).

0-Disabled 1-Enabled

ENABLE_HOTELING

0

It enables or disables the hoteling feature.

0-Disabled 1-Enabled, users can use any available host (shared) phone by logging in with user credentials. After logging in, users have access to their own guest profile on the host phone.

ENABLE_IP_CALL

0

It enables or disables to allow IP address call. Note: If you want to receive an IP address call, make sure "sip.trust_ctrl" is set to 0 (Disabled).

0-Disabled 1-Enabled

ENABLE_MISSED_CALLS

1

It enables or disables the phone to record missed calls. Note: It works only if "features.save_call_history" is set to 1 (Enabled).

0-Disabled 1-Enabled

ENABLE_PHONELOCK

0

It enables or disables the phone lock feature.

0-Disabled 1-Enabled

ENABLE_SIP_AUTH_DIRECTORIES

0

It configures the authentication mechanism for the XSI access. Note: It works only if "bw.xsi.enable" is set to 1 (Enabled).

0-User Login Credentials for XSI Authentication, the phone uses the XSI user ID and password for XSI authentication. 1-SIP Credentials for XSI Authentication, the phone uses the XSI user ID, the register name and password of the SIP account for XSI authentication.

ENABLE_SIP_HEADER

1

It specifies which display names to be used as the caller ID/callee ID for calls from/to contacts in the phone directory. Note: This parameter also affects history records display. It is not applicable to T48G/T46G/T42G/T41P/T29G phones.

0-Names matched to the entries in the following phone directories are displayed preferentially, the priority is as follows: Local Directory>Remote Phone Book>Broadsoft Network Directory>BroadCloud Buddies>LDAP Directory>Network signaling. 1-Names provided through network signaling are displayed preferentially.

ENABLE_UNAVAIL_CODE

0

It enables or disables the unavailable/away reason code feature. Note: It works only if "account.X.acd.available" is set to 1 (Enabled).

0-Disabled 1-Enabled, the unavailable/away reason of agent state will be displayed on the phone screen (for example, on lunch, in the bathroom, taking a coffee break or a personal break).

ENABLE_VISUAL_VM

1

It enables or disables the visual voice mail feature for the phone. Note: It works only if "bw.xsi.enable" is set to 1 (Enabled).

0-Disabled 1-Enabled

ENABLE_VISUAL_VM

1

It configures the phone behavior when pressing the MESSAGE key when the phone is idle.

0-enter the Set Voice Mail Code screen if the voice mail access code has not been configured; dial out the voice mail access code if the voice mail access code has been configured. 1-enter the View Voice Mail screen

ENABLE_XSI

1

It enables or disables the XSI authentication feature for the phone.

0-Disabled 1-Enabled. If it is set to 0 (Disabled), the following features are unavailable on the phone: BroadWorks Anywhere, Remote Office, Line ID Blocking, Anonymous Call Rejection, Simultaneous Ring Personal, BroadSoft Directory, BroadSoft Call Log, Call Park Feature via XSI Mode, Call Waiting Feature via XSI Mode, Voice Messaging/Video Voice Messaging, Centralized Call Recording, Executive and Assistant, BroadWorks Mobility, Group Night Forwarding, Silent Alerting

ENTERPRISE_COMMON_DIRECTORY

0

It enables or disables the phone to display the enterprise common directory. Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).

0-Disabled 1-Enabled

ENTERPRISE_DIRECTORY

0

It enables or disables the phone to display the enterprise directory. Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).

0-Disabled 1-Enabled

FAILBACK_MODE

0

It configures the mode for the phone to retry the primary server in failover. Note: It works only if "account.X.sip_server.Y.address" is set to the domain name of the SIP server.

0-newRequests: all requests are sent to the primary server first, regardless of the last server that was used. 1-DNSTTL: the phone will send requests to the last registered server first. If the time defined by DNSTTL on the registered server expires, the phone will retry to send requests to the primary server. 2-Registration: the phone will send requests to the last registered server first. If the registration expires, the phone will retry to send requests to the primary server. 3-duration: the phone will send requests to the last registered server first. If the time defined by the "account.X.sip_server.Y.failback_timeout" parameter expires, the phone will retry to send requests to the primary server.

FALLBACK_TIMER

300

It configures the time interval (in seconds) for the phone to detect whether the working outbound proxy server is available by sending the registration request after the fallback server takes over call control.

Integer from 0 to 65535

FEATURE_BW_CALL_PARK

0

It enables or disables the call park feature.

0-Disabled 1-Enabled

FEATURE_BW_CALL_PARK

0

It enables or disables the phone to display a parked indicator when a call is parked against its line.

0-Disabled 1-Enabled

FEATURE_BW_CALL_PARK

0

It enables or disables the phone to play a warning tone when a call is parked against its line. Note: It works only if "features.call_park.park_visual_notify_enable" is set to 1 (Enabled).

0-Disabled 1-Enabled

FEATURE_BW_CALL_PARK

0

It enables or disables the group call park feature.

0-Disabled 1-Enabled, users can select GPark during a call to park a call to the first available user in the call park group, and select Retrieve in the dialing screen to retrieve the parked call.

FEATURE_SYNC

1

It enables or disables to synchronize the feature status between the IP phone and the server.

0-Disabled 1-Enabled, the phone sends a SUBSCRIBE message with event "as-feature-event".

FORWARD_CALL_POPUP

0

It enables or disables the phone to pop up the message when it forwards an incoming call to another party.

0-Disabled 1-Enabled

G711A

0

It enables or disables the specified audio codec.

0-Disabled 1-Enabled

G711U

1

It enables or disables the specified audio codec.

0-Disabled 1-Enabled

G722

0

It enables or disables the specified audio codec.

0-Disabled 1-Enabled

G729

1

It enables or disables the specified audio codec.

0-Disabled 1-Enabled

GROUP_COMMON_DIRECTORY

1

It enables or disables the phone to display the group common directory. Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).

0-Disabled 1-Enabled

GROUP_DIRECTORY

1

It enables or disables the phone to display the group directory. Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).

0-Disabled 1-Enabled

GUIPASSWORD

(contact support)

It configures the password. (contact support)

String within 32 characters

HEADSET_RINGER

0

It configures the ringer device for the phone. Note: To use speaker, make sure "features.speaker_mode.enable" is set to 1 (Enabled). To use headset, make sure "features.headset_mode.enable" is set to 1 (Enabled). It is not applicable to CP920 phones.

0-Use Speaker 1-Use Headset 2-Use Headset & Speaker

HOLD_KEY_TYPE

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

HOLD_TONE

1

It enables or disables the phone to play the call hold tone when you place a call on hold.

0-Disabled 1-Enabled

HOLD_TONE_DELAY

30

It configures the time (in seconds) to wait for the phone to play the initial call hold tone. If it is set to 30 (30s), the phone will wait 30 seconds to play the initial call hold tone after you place a call on hold.

Integer from 3 to 3600

HOTLINE_DELAY

It configures the waiting time (in seconds) for the phone to automatically dial out the preset hotline number. If it is set to 0 (0s), the phone will immediately dial out the preset hotline number when you lift the handset, press the Speakerphone/off-hook key or press the line key. If it is set to a value greater than 0, the phone will wait the designated seconds before dialing out the preset hotline number.

Integer from 0 to 10

HOTLINE_NUMBER

It configures the hotline number that the phone automatically dials out when you lift the handset press the Speakerphone/off-hook key or the line key.

String within 32 characters

LANGUAGE

English

It configures the language used on the phone user interface.

T54W/T54S/T53W/T53/T52S/T48S/T46S/T42S/T41S/T40G/T29G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920: English, Chinese_S, Chinese_T, French_CA, French, German, Italian, Polish, Portuguese, Portuguese_LA, Spanish, Spanish_LA, Turkish, Russian or the custom language name. T48G/T46G/T42G/T41P/T40P: English, Chinese_S, Chinese_T, French, German, Italian, Polish, Portuguese, Spanish, Turkish, Russian or the custom language name.

LEFT_KEY_TYPE

51

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

LINE1LABEL

It configures the label displayed on the phone screen. This is an optional configuration. Note: It is not applicable to T19(P) E2/CP920 phones.

String within 99 characters

LINE1VALUE

It configures the value for some line key features. For example, when you assign the Speed Dial to the line key, this parameter is used to specify the contact number you want to dial out. It is also used to specify the contact number with the DTMF sequence. The contact number and DTMF sequence are separated by commas. Note: You do not need to configure this parameter when "linekey.X.type" is set to 4, 5, 7, 8, 18, 20, 22, 25, 34, 38, 39, 41, 42, 45, 50, 61 or 66. It is not applicable to T19(P) E2/CP920 phones.

String within 99 characters

LINE2LABEL

It configures the label displayed on the phone screen. This is an optional configuration. Note: It is not applicable to T19(P) E2/CP920 phones.

String within 99 characters

LINE2TYPE

15

It configures the key feature. Note: It is not applicable to T19(P) E2/CP920 phones.

0-N/A 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Recall 8-SMS 9-Pickup(pick up/Direct Pickup) 10-Call Park 11-DTMF 12-Voice Mail 13-SpeedDial(Speed Dial) 14-Intercom 15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Paging(Multicast Paging) 25-Record 27-XML Browser 38-LDAP (only appear when "ldap.enable=1") 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 47-XML Directory 50-Phone Lock 56-Retrieve Park 61-Directory 66-Paging List 73-Custom Key (only available when "features.enhanced_dss_keys.enable=1") 34-Hot Desking (not applicable to CP920 phones) 35-URL Record 77-Mobile Line (only applicable to T54W/T54S/T53W/T53/T52S phones when the Bluetooth-enabled mobile phone is connected) 310-Dect Intercom

LINE2USER

2

It configures the desired line to apply the line key feature. Note: You do not need to configure this parameter when "linekey.X.type" is set to 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 17, 18, 20, 22, 24, 25, 27, 34, 35, 38, 39, 40, 41, 42, 45, 50, 61, 66 or 73. It is not applicable to T19(P) E2/CP920 phones.

T54W/T54S/T48S/T48G/T46S/T46G/T29G: 1-16; T53W/T53/T52S/T42S/T42G: 1-12; T41S/T41P/T27G: 1-6; T40P/T40G/T23P/T23G: 1-3; T21(P) E2: 1-2

LINE2VALUE

It configures the value for some line key features. For example, when you assign the Speed Dial to the line key, this parameter is used to specify the contact number you want to dial out. It is also used to specify the contact number with the DTMF sequence. The contact number and DTMF sequence are separated by commas. Note: You do not need to configure this parameter when "linekey.X.type" is set to 4, 5, 7, 8, 18, 20, 22, 25, 34, 38, 39, 41, 42, 45, 50, 61 or 66. It is not applicable to T19(P) E2/CP920 phones.

String within 99 characters

LINE3LABEL

It configures the label displayed on the phone screen. This is an optional configuration. Note: It is not applicable to T19(P) E2/CP920 phones.

String within 99 characters

LINE3TYPE

15

It configures the key feature. Note: It is not applicable to T19(P) E2/CP920 phones.

0-N/A 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Recall 8-SMS 9-Pickup(pick up/Direct Pickup) 10-Call Park 11-DTMF 12-Voice Mail 13-SpeedDial(Speed Dial) 14-Intercom 15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Paging(Multicast Paging) 25-Record 27-XML Browser 38-LDAP (only appear when "ldap.enable=1") 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 47-XML Directory 50-Phone Lock 56-Retrieve Park 61-Directory 66-Paging List 73-Custom Key (only available when "features.enhanced_dss_keys.enable=1") 34-Hot Desking (not applicable to CP920 phones) 35-URL Record 77-Mobile Line (only applicable to T54W/T54S/T53W/T53/T52S phones when the Bluetooth-enabled mobile phone is connected) 310-Dect Intercom

LINE3USER

3

It configures the desired line to apply the line key feature. Note: You do not need to configure this parameter when "linekey.X.type" is set to 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 17, 18, 20, 22, 24, 25, 27, 34, 35, 38, 39, 40, 41, 42, 45, 50, 61, 66 or 73. It is not applicable to T19(P) E2/CP920 phones.

T54W/T54S/T48S/T48G/T46S/T46G/T29G: 1-16; T53W/T53/T52S/T42S/T42G: 1-12; T41S/T41P/T27G: 1-6; T40P/T40G/T23P/T23G: 1-3; T21(P) E2: 1-2

LINE3VALUE

It configures the value for some line key features. For example, when you assign the Speed Dial to the line key, this parameter is used to specify the contact number you want to dial out. It is also used to specify the contact number with the DTMF sequence. The contact number and DTMF sequence are separated by commas. Note: You do not need to configure this parameter when "linekey.X.type" is set to 4, 5, 7, 8, 18, 20, 22, 25, 34, 38, 39, 41, 42, 45, 50, 61 or 66. It is not applicable to T19(P) E2/CP920 phones.

String within 99 characters

LINExLABEL

It configures the label displayed on the phone screen. This is an optional configuration. Note: It is not applicable to T19(P) E2/CP920 phones.

String within 99 characters

LINExTYPE

0

It configures the key feature. Note: It is not applicable to T19(P) E2/CP920 phones.

0-N/A 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Recall 8-SMS 9-Pickup(pick up/Direct Pickup) 10-Call Park 11-DTMF 12-Voice Mail 13-SpeedDial(Speed Dial) 14-Intercom 15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Paging(Multicast Paging) 25-Record 27-XML Browser 38-LDAP (only appear when "ldap.enable=1") 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 47-XML Directory 50-Phone Lock 56-Retrieve Park 61-Directory 66-Paging List 73-Custom Key (only available when "features.enhanced_dss_keys.enable=1") 34-Hot Desking (not applicable to CP920 phones) 35-URL Record 77-Mobile Line (only applicable to T54W/T54S/T53W/T53/T52S phones when the Bluetooth-enabled mobile phone is connected) 310-Dect Intercom

LINExUSER

4

It configures the desired line to apply the line key feature. Note: You do not need to configure this parameter when "linekey.X.type" is set to 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 17, 18, 20, 22, 24, 25, 27, 34, 35, 38, 39, 40, 41, 42, 45, 50, 61, 66 or 73. It is not applicable to T19(P) E2/CP920 phones.

T54W/T54S/T48S/T48G/T46S/T46G/T29G: 1-16; T53W/T53/T52S/T42S/T42G: 1-12; T41S/T41P/T27G: 1-6; T40P/T40G/T23P/T23G: 1-3; T21(P) E2: 1-2

LINExVALUE

It configures the value for some line key features. For example, when you assign the Speed Dial to the line key, this parameter is used to specify the contact number you want to dial out. It is also used to specify the contact number with the DTMF sequence. The contact number and DTMF sequence are separated by commas. Note: You do not need to configure this parameter when "linekey.X.type" is set to 4, 5, 7, 8, 18, 20, 22, 25, 34, 38, 39, 41, 42, 45, 50, 61 or 66. It is not applicable to T19(P) E2/CP920 phones.

String within 99 characters

LLDP_ENABLE

1

It enables or disables the LLDP feature.

0-Disabled 1-Enabled, the phone attempts to determine its VLAN ID through LLDP.

MESSAGE_KEY_TYPE

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

MISSED_CALL_POPUP

0

It enables or disables the phone to pop up the message when it misses a call. Note: It works only if "account.X.missed_calllog" is set to 1 (Enabled).

0-Disabled 1-Enabled

MUTE_KEY_TYPE

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

NUM_OF_LINEKEYS_x

1

It configures the number of line keys to be assigned with a specific account from the first unused one. If a line key is in used, the phone will skip to the next unused DSS key.

Integer from 1 to 999. The number of the line keys varies by phone models, for the supported line keys, refer to Supported DSS Keys.

OK_KEY_TYPE

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

PERSONAL_DIRECTORY

1

It enables or disables the phone to display the personal directory. Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).

0-Disabled 1-Enabled

PHONELOCK_EMERGENCY

112,911,110,999

It configures emergency numbers. Multiple emergency numbers are separated by commas. For T54W/T54S/T53W/T53/T52S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920: If "phone_setting.phone_lock.enable" is set to 1 (Enabled) and "phone_setting.phone_lock.lock_key_type" is set to 0 (All Keys), you are only allowed to dial the configured emergency numbers. For T48G/S: If "phone_setting.phone_lock.enable" is set to 1 (Enabled), you are only allowed to dial the configured emergency numbers.

String within 99 characters

PHONELOCK_PIN

(contact support)

It configures the password for unlocking the phone.

Characters within 15 digits

PHONELOCK_TIMEOUT

0

It configures the idle time (in seconds) before the phone is automatically locked. The default value is 0 (the phone is locked only by long pressing the pound key or pressing the phone lock DSS key). Note: It works only if "phone_setting.phone_lock.enable" is set to 1 (Enabled).

Integer from 0 to 3600

PHONELOCK_TYPE

0

It configures the type of phone lock. Note: It works only if "phone_setting.phone_lock.enable" is set to 1 (Enabled). It is not applicable to T48S/G phones.

0-All Keys 1-Function Keys 2-Menu Key

PROGRAMKEY1_LABEL

DND

It configures the label displayed on the phone screen for a specific programmable key. This is an optional configuration.

String within 99 characters

PROGRAMKEY1_TYPE

5

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

PROGRAMKEY2_LABEL

History

It configures the label displayed on the phone screen for a specific programmable key. This is an optional configuration.

String within 99 characters

PROGRAMKEY2_TYPE

28

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

PROGRAMKEY3_LABEL

Pickup

It configures the label displayed on the phone screen for a specific programmable key. This is an optional configuration.

String within 99 characters

PROGRAMKEY3_TYPE

23

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

PROGRAMKEY3_VALUE

It configures the value for some programmable key features. For example, when you assign the Speed Dial to the programmable key, this parameter is used to specify the contact number you want to dial out. It is also used to specify the contact number with the DTMF sequence. The contact number and DTMF sequence are separated by commas. Note: You need to configure this parameter when "programablekey.X.type" is set to 2, 9, 13, 14, 23, 24, 27, 40 or 73.

String within 99 characters

PROGRAMKEY4_LABEL

Menu

It configures the label displayed on the phone screen for a specific programmable key. This is an optional configuration.

String within 99 characters

PROGRAMKEY4_TYPE

30

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

REDIAL_KEY_TYPE

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

REJECT_ANONYMOUS_CALL_BINARY

0

It triggers the anonymous call rejection feature to on or off.

0-Off 1-On, the phone will automatically reject incoming calls from users enabled anonymous call feature. The anonymous user’s phone screen presents "Anonymity Disallowed".

RIGHT_KEY_TYPE

52

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

RING_TYPE

Ring1.wav

It configures a ring tone for the phone.

Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav, Silent.wav, Splash.wav or custom ring tone name (for example, Customring.wav)

RING_TYPE_x

Common

It configures a ring tone.

Common, Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav, Silent.wav, Splash.wav or custom ring tone name (for example, Customring.wav)

RING_VOL

It configures the ring tone as a fixed volume.

Blank-the user can adjust the ringer volume on the phone. 0 to 15-the user cannot adjust the ringer volume on the phone, the ring tone is the configured volume.

SBC_ADDRESS

us-sbc.14ip.net

It configures the IP address or domain name of the outbound proxy server Y. Note: It works only if "account.X.outbound_proxy_enable" is set to 1 (Enabled). To use an outbound proxy server address, "account.X.sip_server.Y.outbound_proxy_enable" should be set to 1 (Enabled).

IP address or domain name

SBC_PORT

5060

It configures the port of the outbound proxy server Y.

Integer from 0 to 65535

SIP_DIGEST_LIST

It configures the name of the request method for which digest authentication will be applied.

INVITE, ACK, BYE, REGISTER, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, REFER, PRACK, UPDATE

SIP_EXPIRES_TIMER

300

It configures the registration expiration time (in seconds) of SIP server Y.

Integer from 30 to 2147483647

SIP_PORT

5060

It configures the port of SIP server Y. If it is set to 0 when UDP is used ("account.X.sip_server.Y.transport_type" is set to 0), the phone uses a random port for responding the messages from the server.

Integer from 0 to 65535

SNTP_SERVER_1

cn.pool.ntp.org

It configures the IP address or the domain name of the primary NTP server.

IP address or domain name

SNTP_SERVER_2

pool.ntp.org

It configures the IP address or the domain name of the secondary NTP server. If the primary NTP server is not configured by the parameter "local_time.ntp_server1", or cannot be accessed, the phone will request the time and date from the secondary NTP server.

IP address or domain name

STATIC-CACHE-PRI

0

It configures whether preferentially to use the static DNS cache for domain name resolution of the SIP server.

0-Use domain name resolution from server preferentially 1-Use static DNS cache preferentially

SYNC_END

3:00

Time of day

SYNC_START

2:00

Time of day

T(Device Model)_FIRMWARE_VERSION Ex: T46U_FIRMWARE_VERSION

Firmware Version pushed to the device

TEXT_MESSAGE_POPUP

0

It enables or disables the phone to pop up the message when it receives a new text message. Note: It works only if "features.text_message.enable" is set to 1. It is not applicable to CP920 phones.

0-Disabled 1-Enabled

TIME_FORMAT

0

It configures the time format.

0-Hour 12, the time will be displayed in 12-hour format with AM or PM specified. 1-Hour 24, the time will be displayed in 24-hour format (for example, 2:00 PM displays as 14:00).

TIMEZONE

-5

It configures the time zone.

-12 to +14. For available time zones, refer to Time Zone.

TIMEZONENAME

United States-Eastern Time

It configures the time zone name. Note: It works only if "local_time.summer_time" is set to 2 (Automatic) and the parameter "local_time.time_zone" should be configured in advance.

String within 32 characters. The available time zone names depend on the time zone configured by the parameter "local_time.time_zone". For available time zone names, refer to Time Zone.

TRAN_KEY_TYPE

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

TRANSFER_MODE_DSS

1

It configures the transfer mode for DSS key. When the user presses the DSS Key during a call, the DSS Key behavior depends on the transfer mode.

0-New Call 1-Attended Transfer 2-Blind Transfer 4-Optional, users can choose to transfer the call via New Call, Attended Transfer or Blind Transfer manually (not applicable to T48G/T46G/T42G/T41P/T29G phones)

TRANSFER_MODE_DSS

1

It configures the transfer mode for DSS key. When the user presses the DSS Key during a call, the DSS Key behavior depends on the transfer mode. Note: This feature is only applicable to the Speed Dial key, BLF/BLF List key or Transfer key with an assigned value. It is not applicable to T19(P) E2/CP920 phones.

0-New Call 1-Attended Transfer 2-Blind Transfer 4-Optional, users can choose to transfer the call via New Call, Attended Transfer or Blind Transfer manually (not applicable to T48G/T46G/T42G/T41P/T29G phones)

TRANSPORT

3

It configures the type of transport protocol.

0-UDP 1-TCP 2-TLS 3-DNS-NAPTR, if no server port is given, the phone performs the DNS NAPTR and SRV queries for the service type and port.

TRANSPORT

3

It configures the type of transport protocol.

0-UDP 1-TCP 2-TLS 3-DNS-NAPTR, if no server port is given, the phone performs the DNS NAPTR and SRV queries for the service type and port.

UNAVAIL_CODE1

1

It configures the unavailable code which must match one of the codes configured on BroadWorks platform.

Integer from 1 to 2147483647

UNAVAIL_CODE2

2

It configures the unavailable code which must match one of the codes configured on BroadWorks platform.

Integer from 1 to 2147483647

UNAVAIL_CODE3

3

It configures the unavailable code which must match one of the codes configured on BroadWorks platform.

Integer from 1 to 2147483647

UNAVAIL_CODE4

4

It configures the unavailable code which must match one of the codes configured on BroadWorks platform.

Integer from 1 to 2147483647

UNAVAIL_CODE5

5

It configures the unavailable code which must match one of the codes configured on BroadWorks platform.

Integer from 1 to 2147483647

UNAVAIL_CODE_NAME1

It configures the unavailable reason which must match one of the reasons configured on BroadWorks platform.

String within 99 characters

UNAVAIL_CODE_NAME2

It configures the unavailable reason which must match one of the reasons configured on BroadWorks platform.

String within 99 characters

UNAVAIL_CODE_NAME3

It configures the unavailable reason which must match one of the reasons configured on BroadWorks platform.

String within 99 characters

UNAVAIL_CODE_NAME4

It configures the unavailable reason which must match one of the reasons configured on BroadWorks platform.

String within 99 characters

UNAVAIL_CODE_NAME5

It configures the unavailable reason which must match one of the reasons configured on BroadWorks platform.

String within 99 characters

UP_KEY_TYPE

28

It configures key feature for a specific programmable key.

0-N/A 2-Forward 5-DND 7-Recall 8-SMS 9-Pick up 13-Speed Dial 14-Intercom 22-XML Group 23-Group Pickup 24-Multicast Paging (Paging) 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking 38-LDAP (only appear when "ldap.enable = 1") 40-Prefix 41-Zero Touch 43-Local Directory (Local Phonebook) 45-Local Group 47-XML Directory (XML Phonebook) 50-Phone Lock 51-Switch Account Up (not applicable to T19(P) E2) 52-Switch Account Down (not applicable to T19(P) E2) 61-Directory 66-Paging List 73-Custom Key (only appear when "features.enhanced_dss_keys.enable = 1") 85-Favorite (Local Favorite) 310-Dect Intercom

USE_SBC_BOOLEAN

1

It enables or disables the phone to send requests to the outbound proxy server.

0-Disabled 1-Enabled

VLAN_DHCP_ENABLE

1

It enables or disables the DHCP VLAN discovery feature.

0-Disabled 1-Enabled

VLAN_DHCP_OPTION

132

It configures the DHCP option from which the phone will obtain the VLAN settings. Multiple DHCP options (at most five) are separated by commas.

Integer from 1 to 255

VLAN_ENABLE

0

It enables or disables the VLAN for the Internet port.

0-Disabled 1-Enabled

VLAN_ID

1

It configures the VLAN ID for the Internet port. Note: It works only if "static.network.vlan.internet_port_enable" is set to 1 (Enabled).

Integer from 1 to 4094

VLAN_PC_ENABLE

0

It enables or disables the VLAN for the PC port. Note: It works only if "static.network.pc_port.enable" is set to 1 (Auto Negotiation). It is not applicable to CP920 phones.

0-Disabled 1-Enabled

VLAN_PC_PRIORITY

0

It configures the VLAN priority for the PC port. 7 is the highest priority, 0 is the lowest priority. Note: It works only if "static.network.pc_port.enable" is set to 1 (Auto Negotiation) and "static.network.vlan.pc_port_enable" is set to 1 (Enabled). It is not applicable to CP920 phones.

Integer from 0 to 7

VLAN_PRIORITY

0

It configures the VLAN priority for the Internet port. 7 is the highest priority, 0 is the lowest priority. Note: It works only if "static.network.vlan.internet_port_enable" is set to 1 (Enabled).

Integer from 0 to 7

VLAN_VID_ENABLE

1

It configures the VLAN ID for the PC port. Note: It works only if "static.network.pc_port.enable" is set to 1 (Auto Negotiation) and "static.network.vlan.pc_port_enable" is set to 1 (Enabled). It is not applicable to CP920 phones.

Integer from 1 to 4094

VMAIL_POPUP

0

It enables or disables the phone to pop up the message when it receives a new voice mail. If the message disappears, it will not pop up again unless the phone receives a new voice mail or the user re-registers the account that has unread voice mail(s). Note: It works only if "account.X.display_mwi.enable" is set to 1 (Enabled).

0-Disabled 1-Enabled

VMAIL_TONE

0

It enables or disables the phone to play a warning tone when it receives a new voice mail. Note: It works only if "account.X.display_mwi.enable" is set to 1 (Enabled).

0-Disabled 1-Enabled

XSI_REFRESH_TIME

60

It configures the interval (in minutes) for the phone to update the data of the BroadSoft directory from the BroadSoft server. Note: It works only if "bw.xsi.directory.enable" and "bw.xsi.directory.update.enable" are set to 1 (Enabled).

Integer from 60 to 34560

XSP_ADDRESS

XSP.14IP.NET

It configures the IP address or domain name of the Xtended Services Platform server. Note: It works only if "bw.xsi.enable" is set to 1 (Enabled).

IP address or domain name